OMRON PHOTOELECTRIC SENSOR BACK GROUND SUPPRESION E3ZM-LS86H

Description

Shape
Square type
Sensing method
BGS reflective (fixed distance)
Sensing distance
10 mm to 100 mm (White paper 100 x 100 mm)
Spot size
4 mm dia. max. (At sensing distance of 100 mm)
Differential distance
3% max. of sensing distance
Reflectivity characteristic (black-white error)
5% max. of sensing distance
Light source
Red LED (Emission wave length: 650 nm)
Power supply voltage
10 to 30 VDC (ripple (p-p) 10% included)
Current consumption
25 mA max.
Control output
PNP open collector output
30 VDC max.
Load current: 100 mA max.
Residual voltage: 2 V max.
Operation mode
Light-ON/Dark-ON selectable
Protective circuit
Output short-circuit protection
Output reverse polarity protection
Power supply reverse polarity protection
Mutual interference prevention
Response time
1 ms max. (Operate or reset)
Ambient illuminance
Incandescent lamp: 3000 lux max., Sunlight: 10000 lux max.
Ambient temperature (Operating)
-25 to 55
℃
(with no icing or condensation)
Ambient temperature (Storage)
-40 to 70
℃
(with no icing or condensation)
Ambient humidity
Operating: 35 to 85%
Storage: 35 to 95%
(with no icing or condensation)
Insulation resistance
20 MΩ min. at 500 VDC
Dielectric strength
1000 VAC at 50/60 Hz for 1 min
Vibration resistance
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
500 m/s**2 for 3 times each in X, Y, and Z directions
Degree of protection
IEC: IP67
IP69K (DIN40050-9)
Connection method
M8 connector models
Indicator
Operation indicator (yellow), Stability indicator (green)
Weight (packed state)
Approx. 40 g
Material
Case: SUS316L
Lens: Methacrylate resin
Display: PEI (Polyetherimide)
Seals: Fluorocarbon rubber
Accessories
Instruction manual